请问如何测量螺旋伞齿轮，我的机器比较老，版本是quindos3.0

AUTZER SETMAGA (MGZ=0) DELELE ELE:PRB(), N CALSPH (NAM=PRB(1), DIA=3, NRF=Y, MGZ=0) CALSPH (NAM=PRB(11), DIA=3, NRF=N, MGZ=0) STARPRC (NAM=PRB(11), FUL=8, NBR=4, STP=1, CLD=1) STARPRC (NAM=PRB(15), FUL=8, NBR=1, STP=1, ANG=30, CLD=1) STARPRC (NAM=PRB(16), FUL=8, NBR=2, STP=1, CLD=1) !--------Orientation------------- USEPRB (NAM=PRB(11)) MEPLA (NAM=MA_PLAMZ, CSY=REFR$CSY, MOD=NOE) MECIR (NAM=MA_CIR, CSY=REFR$CSY, PRO=MA_PLAMZ, MOD=NOE) BLDCSY (NAM=MA_CSY, SPA=MA_PLAMZ, SDR=Z, XZE=MA_CIR, YZE=MA_CIR, ZZE=MA_MA) !-------Orientation USEPRB (NAM=PRB(11)) GENCYL (NAM=CYL_40, ZCO=-33, DIA=40, INO=O, MIP=-20, MXP=-160, PDI=3, LEN=10 MECYL (NAM=CYL_40) MEPNT (NAM=MOV_1, MOD=(NOC,NO)) GENCIR (NAM=PLA_MZ, DIA=28.5*2, NPT=6, INO=N, MIP=-180, MXP=0, PDI=3, ZVL=20 MEPLA (NAM=PLA_MZ, MOD=NOE) BLDCSY (NAM=CSY, SPA=CYL_40, SDR=Z, XZE=CYL_40, YZE=CYL_40, ZZE=PLA_MZ) TRAOBJ (NEW=CSY(1), OLD=CSY, SHZ=Z, REF=CSY) !------measure the master flanks MEPNTSPA (NAM=MOV_2, CSY=CSY(1), MOD=(NOC,NOE)) MEBVMAST MEBVMAST !-----measure the reference tooth----------- USEPRB (NAM=PRB(12)) MEPNTSPA (NAM=PNT_REF, MOD=(NOC,NOE)) USECSY (NAM=CSY(1)) FINDBVP !-----Generate nominal probings for the flanks ! Here:NO.5 only USECSY (NAM=CSY(1)) GENBVFLA ! Measure all flanks MEBVFLA ! Measure pitch and runout USECSY (NAM=CSY(1)) DFNCIRPI MECIRPI ! Evaluate pitch and runout BVPITCH ! Plot and print results USEPFR (NAM=HP_A4H, ROT=90) MANPLO DRWBVFLA LISBVERR BVLISTHK STOP SAVPRC (FIL=BVGEAR)