公司有让学高级编程的打算了，[color=red]自己先预习了一下下[/color]，下面搞了一个扫描圆的程序，每隔一度一个点，不是用的阵列哦，作为自己学高级编程打的一点点基础而已！[color=blue]高手们可以路过了[/color]。。。不多说了，上程序： PART NAME : 1 REV NUMBER : SER NUMBER : STATS COUNT : 1 STARTUP =ALIGNMENT/START,RECALL:,LIST=YES ALIGNMENT/END MODE/MANUAL FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , LOADPROBE/ROMER_PROBE7 TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=-90 MODE/DCC ASSIGN/XX = 124 ASSIGN/YY = 50 ASSIGN/R = 30.25 ASSIGN/V1 = 0 DO/ PNT1 =FEAT/CONTACT/VECTOR POINT,CARTESIAN THEO/<XX+V4*R,YY+V3*R,-3>,<V6,V5,0> ACTL/<154.245,49.472,-3>,<-0.9998477,0.0174524,0> TARG/<XX+V4*R,YY+V3*R,-3>,<V6,V5,0> SHOW ADVANCED MEASUREMENT OPTIONS=NO SHOW_CONTACT_PARAMETERS=NO ASSIGN/V1 = V1+1 ASSIGN/V2 = DEG2RAD(V1) ASSIGN/V3 = SIN(V2) ASSIGN/V4 = COS(V2) ASSIGN/V5 = -1*SIN(V2) ASSIGN/V6 = -1*COS(V2) UNTIL/V1>359 [attachimg]1330[/attachimg] [color=lime]有明年想去青岛学习高级编程的童鞋，来交流一下下，说不定到青岛了能遇上哦，呵呵！！！[/color]